Product ID:DMD623 DELTRON MIXING ACRYLIC URETHANE
MSDS Date:05/24/1993
FSC:8010
NIIN:00F006475
MSDS Number: BBVTQ

PPG IND COATINGS/RESINS/RESEARCH DEV

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555

Info Phone: 412-492-5555

Cage: EO471

PPG IND COATINGS/RESINS/RESEARCH DEV

9 ALLISON PARK, PA 15101 US

Telephone: 412-492-5555

Cage: EO471

RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 5-10%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE *93/1*

CAS: 64742-89-8

Fraction By Weight: 2-5%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 2-5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BUTYL ACETATE (N-BUTYL ACETATE)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 30-35%

OSHA PEL 700 MG/CUM

ACGIH TLV: 713 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 40-45%

8.54

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL. EYES/SKIN:
IRRITATION. INHALATION: HARMFUL. NOSE/THROAT/RESPIRATORY SYSTEM
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHES, NAUSEA, DIZZINESS, LOSS
OF COORDINATION, PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. EYES:
REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES. SKIN:
DRYNESS, ITCHING, CRACKI NG, BURNING, REDNESS & SWELLING.

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS. SKIN: FLUSH W/PLENTY OF WATER, FOLLOWED
BY WATERLESS HAND CLEANER & SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. APPLY ARTIFICIAL RESPIRATION & OTHER SUPPORTIVE
MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.6%
Extinguishing Media:CO2, DRY CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY: INEFFECTIVE. USE WATER SPRAY TO
COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. USE SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DON'T APPLY TO HOT SURFACES. TOXIC GASES
MAY FORM WHEN PRODUCT IS CONTACTED BY FLAME/HOT SURFACES.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. WEAR PROTECTIVE
EQUIPMENT. REMOVE ALL IGNITION SOURCES. TAKE UP SPILLED MATERIAL
W/SAWDUST/VERMICULITE OR OTHER ABSORBENT MATERIAL & PLACE INTO
CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS
IB FLAMMABLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. GROUND CONTAINERS
WHEN POURING. AVOID FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.

Respiratory Protection:USE NIOSH/MSHA APPROVED (TC-23C) AIR PURIFYING
OR AIR SUPPLIED (TC-19C) RESPIRATORS.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP BELOW TLV.
Protective Gloves:NEOPRENE, LATEX
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERMEABLE APRON
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
PERCENT SOLID BY WEIGHT: 52.43

Boiling Pt:B.P. Text:78-214C
Vapor Pres:25
Vapor Density:>1
Spec Gravity:1.02
Evaporation Rate & Reference:(BU AC = 100): 224
Solubility in Water:2.4%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF SOLVENTS
Percent Volatiles by Volume:57.1

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME OR OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:CO

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. RECYCLE OR DISPOSE EMPTY CONTAINERS AT AN
APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.